Vacuum tribological behaviour of self lubricant quasicrystalline composite coatings

High temperature resistant self-lubricant coatings are needed in space vehicles for components that operate at high temperatures and/or under vacuum. Thick composite lubricant coatings containing quasicrystalline alloys (QC) as the hard phase for wear resistance, have been deposited by thermal spray. The coatings also comprise lubricating materials (silver and BaF2-CaF2 eutectic) and NiCr as the tough component. This paper describes the vacuum tribological properties of TH103, a coating belonging to this family, with excellent microstructural quality. The coating was deposited by HVOF and tested under vacuum on a pin-on-disc tribometer. Different loads, linear speeds and pin materials were studied. The pin scars and disc wear tracks were characterized by EDS-SEM. A minimum mean steady friction coefficient of 0.32 was obtained employing a X-750 Ni superalloy pin in vacuum conditions under 10 N load and 15 cm/s linear speed, showing moderate wear of the disc and low wear of the pin

Transverse Symmetry and Spin-3/2 Fields

We study the possible covariant Lagrangians that describe the propagation of pure spin-3/2 particles. We show that, apart from the well-known Rarita-Schwinger Lagrangian, there is another possibility where the field is described by a gamma-traceless combination and that both Lagrangians yield the same physical predictions for the interaction of conserved sources. We also prove that for the case when the spin-2 field is described by a traceless field, there is no possible spin-3/2 action that makes the system supersymmetric. Nevertheless, the interaction between this field andthe spin-3/2 field may be possible.Comment: 12 pages. To appear in Peyresq XII proceeding

Longitudinal Study of Total and Pathogenic Vibrio parahaemolyticus (tdh+ and/or trh+) in Two Natural Extraction Areas of Mytilus chilensis in Southern Chile

Vibrio parahaemolyticus is the leading cause of seafood-associated bacterial gastroenteritis worldwide. Although different studies have focused on its pattern of variation over time, knowledge about the environmental factors driving the dynamics of this pathogen, within the Chilean territory, is still lacking. This study determined the prevalence of total and pathogenic V. parahaemolyticus strains (tdh and/or trh genes) in mussels (Mytilus chilensis) collected from two natural growing areas between 2017 and 2018, using selective agar and PCR analysis. V. parahaemolyticus was detected in 45.6% (93/204) of pooled samples from the Valdivia River Estuary. The pathogenic strains carrying the tdh and/or trh gene were detected in 11.8% (24/204): tdh in 9.8% (20/204), trh in 0.5% (1/204), and 1.5% (3/204) presented both genes. In Reloncaví Fjord, V. parahaemolyticus was detected in 14.4% (30/209) of the samples, pathogenic V. parahaemolyticus carrying the trh gene was detected in 0.5% (1/209) of the samples, while the tdh gene was not detected in the samples from this area. The total count of mauve-purple colonies typical of V. parahaemolyticus on CHROMagar was positively associated by multivariate analysis with area, water temperature, and salinity. Similarly, V. parahaemolyticus detection rates by PCR had a positive correlation with the area and water temperature. The chances of detecting total V. parahaemolyticus in the Valdivia River Estuary are significantly higher than in the Reloncaví Fjord, but inversely, during spring-summer months, the interaction factor between the area and temperature indicated that the chances of detecting V. parahaemolyticus are higher in the Reloncaví Fjord. Interestingly, this period coincides with the season when commercial and natural-growing shellfish are harvested. On the other hand, pathogenic V. parahaemolyticus tdh+ was significantly correlated with an increase of water temperature. These environmental parameters could be used to trigger a warning on potential hazard, which would influence human health and economic losses in aquaculture systems.

Vacuum Tribological Behaviour of Self-Lubricating Quasicrystalline Composite Coatings

High-temperature-resistant self-lubricating coatings are needed in space vehicles for components that operate at high temperatures and/or under vacuum. Thick composite lubricant coatings containing quasicrystalline alloys as the hard phase for wear resistance can be deposited by a thermal spray technique. The coatings also contain lubricating materials (silver and BaF2CaF2 eutectic) and NiCr as the tough component. This paper describes the vacuum tribological properties of TH103, a coating of this type, with a very good microstructural quality. The coating was deposited by high-velocity oxygen fuel spraying and tested under vacuum using a pin-on-disc tribometer. Different loads, linear speeds, and pin materials were studied. The pin scars and disc wear tracks were characterised using a combination of scanning electron microscopy and energy dispersive spectrometry. A minimum mean steady friction coefficient of 0.32 was obtained when employing an X750 Ni superalloy pin in vacuum conditions under 10 N load and 15 cm/s linear speed, showing moderate wear of the disc and low wear of the pi

Reducción de los tiempos de observación en la evaluación del observación en la evaluación del comportamiento de conejas en producción. Análisis metodológico.

El objetivo de este trabajo fue evaluar diferentes técnicas de muestreo que redujeran el tiempo total de observación necesario para estimar el comportamiento de conejas alojadas en dos tipos de jaulas (convencionales vs. enriquecidas) y en dos estados fisiológicos distintos (gestantes vs. lactantes). Para ello, se compararon grabaciones completas de 24 h (método control de referencia) con estimaciones obtenidas a partir de grabaciones de diferente duración y frecuencia (métodos regular corto y regular largo y métodos irregulares de 6h y de 8h). A partir de los resultados obtenidos se observa que los métodos regulares se ajustaron mejor al método de referencia de 24h que los irregulares. Desde un punto de vista práctico el método regular corto sería el ideal, al reducir considerablemente el número total de horas de observación y análisi

A comparison of the prediction of apparent metabolisable energy content of starchy grains and cereal by-products for poultry from its chemical components, in vitro analysis or near-infrared reflectance spectroscopy

Regression models including chemical composition, in vitro digestibility and near infrared reflectance spectroscopy (NIRS) were compared in order to predict the energy value of several feed ingredients for poultry. The nitrogen-corrected apparent metabolisable energy content (AMEn) in cockerels and its proportion on total gross energy (AMEn/GE) were determined in 94 batches from six starchy grains and six cereal byproducts. Two preliminary trials were also designed to adapt in vitro methods for prediction of in vivo energy values for poultry. Mean concentrations of AMEn of the ingredient studied ranged from 2,464 to 3,595 kcal kg -1 DM, and those of AMEn/GE from 53.7 to 80.0%. The most precise model of prediction of AMEn and AMEn/GE values was that based on NIRS equations (R2 cv = 0.823 and 0.861, respectively). The best single chemical predictor of these energy values was the neutral detergent fibre concentration (R2 = 0.616 and 0.736, respectively). Further inclusion of ether extract and ash contents in the AMEn model and those of starch and ether extract in the AMEn/GE model allowed increasing coefficients of determination up to 0.791 and 0.839, respectively. A model including linear and quadratic effects of in vitro organic matter digestibility (IVOMd) provided a similar prediction of AMEn/GE values (R2 = 0.833). However the prediction of AMEn from IVOMd was worse (R2 = 0.62), as variations among batches of GE concentration (from 4,225 to 5,896 kcal kg –1 DM) were little related to in vitro digestibility values

Descriptive study of production factors affecting performance traits in growing-finishing pgis in Spain.

The objective of this study was to build up a data set including productive performance and production factors data of growing-finishing (GF) pigs in Spain in order to perform a representative and reliable description of the traits of Spanish growing-finishing pig industry. Data from 764 batches from 452 farms belonging to nine companies (1,157,212 pigs) were collected between 2008 and 2010 through a survey including five parts: general, facilities, feeding, health status and performance. Most studied farms had only GF pigs on their facilities (94.7%), produced ‘industrial’ pigs (86.7%), had entire male and female (59.5%) and Pietrain-sired pigs (70.0%), housed between 13-20 pigs per pen (87.2%), had 50% of slatted floor (70%), single-space dry feeder (54.0%), nipple drinker (88.7%) and automatic ventilation systems (71.2%). A 75.0% of the farms used three feeding phases using mainly pelleted diets (91.0%), 61.3% performed three or more antibiotic treatments and 36.5% obtained water from the public supply. Continuous variables studied had the following average values: number of pigs placed per batch, 1,515 pigs; initial and final body weight, 19.0 and 108 kg; length of GF period, 136 days; culling rate, 1.4%; barn occupation, 99.7%; feed intake per pig and fattening cycle, 244 kg; daily gain, 0.657 kg; feed conversion ratio, 2.77 kg kg-1 and mortality rate, 4.3%. Data reflecting the practical situation of the Spanish growing and finishing pig production and it may contribute to develop new strategies in order to improve the productive and economic efficiency of GF pig units

On Non-Linear Actions for Massive Gravity

In this work we present a systematic construction of the potentially ghost-free non-linear massive gravity actions. The most general action can be regarded as a 2-parameter deformation of a minimal massive action. Further extensions vanish in 4 dimensions. The general mass term is constructed in terms of a "deformed" determinant from which this property can clearly be seen. In addition, our formulation identifies non-dynamical terms that appear in previous constructions and which do not contribute to the equations of motion. We elaborate on the formal structure of these theories as well as some of their implications.Comment: v3: 22 pages, minor comments added, version to appear in JHE

Proposal of a production and management index (PMI) for tilapia farms

Tilapia is one of the most important species in aquaculture; however, there is no available index to show the performance of a production unit. It is desirable to assess the productivity using indexes, such as the production and management index for shrimps and the European production efficacy factor for broilers. These indexes are based on data production: growth, survival, and feed conversion of a full production cycle. Taking into account these parameters, we propose a production and management index (PMI) for tilapia that is applicable for a specific period of the production cycle. For the construction and validation of the PMI we have used production data from 8, 614 monthly records of 2 tilapia farms in Huila Department (Colombia), and because of the complexity of tilapia management, different anomalous situations have been detected and then defined as exceptions. As a result, 419 records were considered extreme values because 1 or more exceptions were met. The value of the PMI varies from 0 (the worst situation) to 3.55, which reflects high variability. We have constructed a PMI for tilapia as the product of 3 elements to obtain a positive value index. Instead of classic parameters, we had to calculate an adapted version of them: the relative average daily growth, the survival (as a complementary value of the estimated monthly mortality), and a feed conversion ratio index. To assess the utility of the PMI, some comparisons were performed using records from black and red tilapia. We observed significant differences depending on tilapia strain (PMIblack = 1.0248 vs. PMIred = 1.1661; P < 0.001), age (better values for small fish), and season (PMIrainy = 1.0847 vs. PMIdry = 1.1011; P = 0.026). According to these results, we can conclude that the PMI could be a useful tool for tilapia farmers, despite the complexity of the calculation

New derivation of soliton solutions to the AKNS2_2 system via dressing transformation methods

We consider certain boundary conditions supporting soliton solutions in the generalized non-linear Schr\"{o}dinger equation (AKNS$_r$)\,($r=1,2$). Using the dressing transformation (DT) method and the related tau functions we study the AKNS$_{r}$ system for the vanishing, (constant) non-vanishing and the mixed boundary conditions, and their associated bright, dark, and bright-dark N-soliton solutions, respectively. Moreover, we introduce a modified DT related to the dressing group in order to consider the free field boundary condition and derive generalized N-dark-dark solitons. As a reduced submodel of the AKNS$_r$ system we study the properties of the focusing, defocusing and mixed focusing-defocusing versions of the so-called coupled non-linear Schr\"{o}dinger equation ($r-$CNLS), which has recently been considered in many physical applications. We have shown that two$-$dark$-$dark$-$soliton bound states exist in the AKNS$_2$ system, and three$-$ and higher$-$dark$-$dark$-$soliton bound states can not exist. The AKNS$_r$\,($r\geq 3$) extension is briefly discussed in this approach. The properties and calculations of some matrix elements using level one vertex operators are outlined.Comment: 34 pages, 3 figures. Extended version of arXiv:1110.3108[nlin.SI], to appear in J. Phys. A: Math. Theo